Offers multi-point locking, and when the handle is lifted upwards it activates locking rods at the top and bottom of the door for added security.

Lock is fixed separately to the door and is activated by a key or interior turn knob. A four-point locking system is available. 

Apex or Windsor turn sets are compatible with this pull handle.

This swivel lock activates locking rods in the top and bottom of the bifold door or window panel.

This small lever handle locks sliding door panels together, usually in 4-panel configurations. May be used in conjunction with a pull handle on heavier doors. Self-latching option available.

The flush pull is ideal for lighter sliding panels where a robust hand grip is not required.

An all-in-one handle and lock for sliding doors or windows. Snib or keyway installed in the body of the handle.

Closes against the window frame with no visible flap or wedge. Available in a low profile option.

Fastener at top with separate wedge is suitable for APL Architectural Series.

A venting option is available which allows the window to be fastened in a partially open position for passive ventilation.

Single hand, two-point locking (no closing wedge). Secure venting position available.

Available in a variety of locking options. An upward handle movement activates multi-point locking.

The small Miro sliding door handle is suited to Residential Series sliding doors. The large Miro sliding door handle is suited to use on entrance doors and Metro Series and APL Architectural Series sliding doors.

Apex or Windsor turn sets are compatible with this pull handle.

This swivel lock activates locking rods in the top and bottom of the bifold door or window panel.

This all-in-one handle and lock for sliding doors or windows has no separately installed snib or keyway.

Combines a sure hand grip with clean lines.  Available in a low profile option.

Suitable for APL Architectural Series and Smartwood windows. A separate colour matching wedge is fitted to the frame or transom.

A venting option of the window fastener is available which allows the window to be fastened in a partially open position for passive ventilation.

A separate lock for use with the Icon pull handle. Available in turn snib or key options.

A clean compact lever handle. Available in a variety of locking options. An upward handle movement activates multi-point locking.

Fixed to the door on both the interior and exterior with a lock fixed separately. Apex or Windsor turn sets are compatible with this handle.

This swivel lock activates locking rods in the top and bottom of the door or window panel.

The flush pull is ideal for lighter sliding panels where a robust hand grip is not required.

This fastener for Residential Series awning and casement windows blends square-edged and radiused looks. Closes against the window frame with no visible flap or wedge. Available in a low profile option.

Suitable for APL Architectural Series . A separate colour matching wedge is fitted to the frame or transom.

A separate lock for use with the Icon pull handle. Available in turn snib or key options

Snib or key operation is available for secure four-point locking.

Available in two standard sizes but can be made to any length by special order. The sliding door handle is separate from the lock, which is operated by a key or snib.  

Ideal for lighter sliding panels. The lock is mounted separately from the pull, and is operated by a key or snib.

A sleek swivel lock that activates locking rods in the top and bottom of the door or window panel.

Single hand, two-point locking (no closing wedge). Secure venting position available.

Closes against the window frame with no visible flap or wedge. Available in a low profile option

A venting option of the window fastener is available which allows the window to be fastened in a partially open position for passive ventilation.

A separate lock for use with the Elemental pull handle. Available in turn snib or key options.